Do you have a question about the RuiDa RDC6442 and is the answer not in the manual?
Configure the mainboard to work in network mode with specific IP address range.
Set the computer's IP address within the specified range to connect to the mainboard.
Ruida mainboard connections follow the same configuration as described for a single mainboard.
Set up another network connection for public access, including router IP and DNS configuration.
Connect computer to concentrator input and mainboards to concentrator output.
Set distinct IP addresses for each Ruida mainboard in the 192.168.001.100-192.168.001.149 range.
Set the computer's IP address to 192.168.001.2 - 192.168.001.049.
Computer and multiple Ruida mainboards connect to the concentrator's output port.
Set different IP addresses for each Ruida mainboard: 192.168.001.100-192.168.001.149.
Refer to Section 2 for router and computer configurations.
Configure the mainboard to work in network mode with specific IP address range.
Set the computer's IP address within the specified range to connect to the mainboard.
Ruida mainboard connections follow the same configuration as described for a single mainboard.
Set up another network connection for public access, including router IP and DNS configuration.
Connect computer to concentrator input and mainboards to concentrator output.
Set distinct IP addresses for each Ruida mainboard in the 192.168.001.100-192.168.001.149 range.
Set the computer's IP address to 192.168.001.2 - 192.168.001.049.
Computer and multiple Ruida mainboards connect to the concentrator's output port.
Set different IP addresses for each Ruida mainboard: 192.168.001.100-192.168.001.149.
Refer to Section 2 for router and computer configurations.
| Communication | USB, Ethernet |
|---|---|
| Power Supply | 24V DC |
| Network | Ethernet |
| Axes | 4-axis |
| Display | LCD |
| Offline Operation | Yes |
| Supported Motors | Stepper |
Loading...