Ruijie RG-WLAN Series - Page 17

Configuration Guide Configuring WLAN
Ruijie(config)# ap-config ap-name
Enter the configuration mode of the specified AP.
Ruijie(config-ap)#[no] stbc radio radio_id
Use this command to enable LDPC on the designated
AP.
Use the no form of this command to disable LDPC on the
designated AP.
radio_id: RF port number.
By default, this function is enabled.
Configuring 11n Space-Time Block Coding
Space–time block coding is a technique used in wireless communications to transmit multiple copies of a data stream
across a number of antennas at different time and to exploit the various received versions of the data to improve the
reliability of data-transfer. An obvious advantage of STBC is adopting simple maximum likelihood decoding to realize full
antenna gain. But some terminals may be incompatible with STBC. This commands is used to enable or disable this
function.
Command Function
Ruijie(config)# ap-config ap-name
Enter the configuration mode of the specified AP.
Ruijie(config-ap)#[no] stbc radio radio_id
Use this command to enable STBC on the designated
AP.
Use the no form of this command to disable STBC on the
designated AP.
radio_id: RF port number.
By default, this function is enabled.