Need help?Do you have a question about the Ruijie Reyee RG-RAP Series and is the answer not in the manual?
General| Model | RG-RAP Series |
|---|---|
| Category | Wireless Access Point |
| Antenna | Internal |
| Wireless Protocol | Wi-Fi |
| Wireless Standards | 802.11a/b/g/n/ac |
| Frequency Band | Dual-band |
| Operating Frequency | 2.4 GHz, 5 GHz |
| Ethernet Ports (Specific) | 1 x Gigabit Ethernet |
| Power Supply | PoE or DC power adapter |
| Power Supply (Simplified) | PoE/DC |
| Operating Temperature | 0°C to 40°C |
| Antenna Type | Omnidirectional |
| Mounting | Wall or ceiling mount |
| Management | Reyee Cloud, Web interface |
| Security | WPA/WPA2 |
Guides on connecting to the access point and logging into the web interface.
Step-by-step guide for initial configuration in router mode using the wizard.
Step-by-step guide for initial configuration in AP mode using the wizard.
Step-by-step guide for initial configuration in wireless repeater mode.
Guides on viewing network topology, device status, and traffic flow.
Instructions for adding new wired and wireless devices to the network.
Covers configuring network planning, including Wi-Fi and Wired VLANs.
Steps to set up or modify the Wi-Fi network name (SSID) and password.
How to set up a guest Wi-Fi network with client isolation and time limits.
Guides on setting up rate limiting for clients, SSIDs, and APs.
Guides on optimizing Wi-Fi performance via channel, width, and power adjustments.
Guides on configuring client and traffic load balancing for APs.
Overview of wireless authentication methods and their configuration.
Detailed guide on configuring IEEE 802.1X port-based network access control.
Steps to configure the IPv4 internet connection type (PPPoE, DHCP, Static IP).
Detailed instructions for setting up wired and wireless repeater modes.
Guides on creating VLANs for network segmentation.
Steps to enable and configure the DHCP server function for IP address assignment.
Overview of IPv6 protocol and its configuration options.
Guides on how to change the device login password for security.
Overview of SNMP protocol for network management and configuration steps.
Guides on scheduling automatic device reboots for maintenance.
Guides on restoring the current device or all devices to factory settings.
Guides on upgrading device firmware and checking the current system version.
Guides on performing a network check to identify and resolve faults.
Overview of network diagnostic tools like Ping, Traceroute, and DNS Lookup.
How to view and manage network alarms and alerts.
Troubleshooting steps for failed login attempts to the management system.
How to restore the device to factory default settings if issues arise.
Guidance on what to do if the webpage or Wi-Fi password is lost.
To Next Page
