Web-based Configuration Guide Wi-Fi Network Settings
66
3.15.6 Configuring the Multicast Rate
Caution
This function is supported by only RG-RAP2260(G), RG-RAP2260(E), RG-RAP6260(G), RG-
RAP6262(G), RG-RAP2260(H), RG-RAP6260(H), RG-RAP6260(H)-D, RG-RAP2266, RG-
RAP2260, and RG-RAP6262.
Choose Network ( WLAN) > Radio Frequency.
If the multicast rate is too high, the packet loss rate of multicast packets may increase. If
the multicast rate is too low, the radio interface may become busy. When network
stalling is serious, you are advised to configure a high multicast rate. When network
stalling is minor, configure a medium multicast rate. After adjusting the configuration,
click Save.
To Next Page
Loading...
