Web-based Configuration Guide System Settings
182
b Enter the user name and group name in the pop-up window. As the user’s security
level is authentication and encryption, enter the authentication protocol,
authentication password, encryption protocol, and encryption password.
c Click OK.
5.6.5 Configuring Trap Service
Trap is a notification mechanism of the Simple Network Management Protocol (SNMP)
protocol. It is used to report the status and events of network devices to administrators,
including device status, faults, performance, configuration, and security management.
Trap provides real-time network monitoring and fault diagnosis services, helping
administrators discover and solve network problems in a timely manner.
1. Enabling Trap Service
Enable the trap service and select the effective trap version, including v1, v2c, and v3
versions.
In Network mode, choose System > SNMP > Trap Settings
(1) Enable the trap service.
To Next Page
Loading...
Need help?
General
