Ruijie Reyee RG-RAP Series - Configuring Wireless Rate Limiting

Web-based Configuration Guide Wi-Fi Network Settings
55
3.13 Configuring Wireless Rate Limiting
Caution
This function is supported by only RG-RAP2260(G), RG-RAP2260(E), RG-RAP6260(G), RG-
RAP6262(G), RG-RAP2260(H), RG-RAP6260(H), RG-RAP6260(H)-D, RG-RAP2266, RG-
RAP2260, and RG-RAP6262.
3.13.1 Overview
The device supports four rate limiting modes: client-based rate limiting, SSID-based rate
limiting, AP-based rate limiting, and packet-based rate limiting. For the same client, if
multiple rate limiting modes are configured, the priority order is as follows: client-based
rate limiting > SSID-based rate limiting > AP-based rate limiting.
 Client-based rate limiting: This function allows you to limit the rate based on the MAC
address of the client, so as to limit or guarantee the bandwidth required by specific
clients.
 SSID-based rate limiting: This function provides two rate limiting modes for a specified
SSID: Rate Limit Per User and Rate Limit All Users. Rate Limit Per User means that