Ruijie Reyee RG-RAP Series - Optimizing the Transmit Power

Web-based Configuration Guide Wi-Fi Network Settings
65
3.15.5 Optimizing the Transmit Power
For RG-RAP2260(G), RG-RAP2260(E), RG-RAP6260(G), RG-RAP6262(G), RG-RAP2260(H), RG-
RAP6260(H), RG-RAP6260(H)-D, RG-RAP2266, RG-RAP2260, RG-RAP1261, RG-RAP1260 and
RG-RAP6262 models:
 Configure the master device. Choose Network ( WLAN) > Radio Frequency
 Configure the slave device. Choose Devices > Select the target device in the
device list and click SN > Radio Frequency
For other RAP models:
 Configure the master device. Choose WLAN > Radio Frequency
 Configure the slave device. Choose WLAN > APs > Select the target device in the
device list and click Manage > WLAN > Radio Frequency
A greater transmit power indicates a larger coverage and brings stronger interference to
surrounding wireless routers. In a high-density scenario, you are advised to set the
transmit power to a small value. The Auto mode is recommended, indicating automatic
adjustment of the transmit power. After adjusting the configuration, click Save.