Ruijie Reyee RG-RAP Series - Configuring Access Threshold

Web-based Configuration Guide Wi-Fi Network Settings
70
thus improving the sensitivity of wireless roaming. Higher the roaming sensitivity level,
smaller the wireless signal coverage. To improve the signal quality for a client moving
within more than one Wi-Fi coverage, improve the roaming sensitivity level. You are
advised to keep the default settings. After adjusting the configuration, click Save.
3.15.10 Configuring Access Threshold
For RG-RAP2260(G), RG-RAP2260(E), RG-RAP6260(G), RG-RAP6262(G), RG-RAP2260(H),
RG-RAP6260(H), RG-RAP6260(H)-D, RG-RAP2266, RG-RAP2260 and RG-RAP6262 models:
 Configure the master device. Choose Network ( WLAN) > Radio Frequency
 Configure the slave device. Choose Devices > Select the target device in the
device list and click SN > Radio Frequency
For other RAP models:
 Configure the master device. Choose WLAN > Radio Frequency
Configure the slave device. Choose WLAN > APs > Select the target device in the
device list and click Manage > WLAN > Radio Frequency