Ruijie Reyee RG-RAP Series - Configuring Wi-Fi Band

Web-based Configuration Guide Wi-Fi Network Settings
48
Item
Description
Duration
Time when the client connects to the Wi-Fi network
RSSI
RSSI of the Wi-Fi network associated with the client
Rate/Negotiation Rate
Association rate of the client and AP
Band
Band type of the Wi-Fi network, to which the client
connects
SSID
Name of the Wi-Fi network associated with the client
Channel
Channel of the Wi-Fi network associated with the client
Current Rate
Uplink and downlink data rate.
3.5 Configuring Wi-Fi Band
(1) Go to the page for configuration.
 Method 1: Choose Network ( WLAN) > Wi-Fi > Wi-Fi Settings. Select the
target Wi-Fi.
 Method 2: Choose Network ( WLAN) > Wi-Fi > Wi-Fi List. Select the target
Wi-Fi in the list and click Edit in the action column.
(2) Set the band of Wi-Fi signals. The device supports the 2.4 GHz and 5 GHz bands.
Compared with the 2.4 GHz band, the 5 GHz band supports a higher network
transmission rate and is less susceptible to interference, but is inferior in signal
coverage and through-wall penetration. You can select an appropriate signal band
based on actual requirements. The default Wi-Fi band is 2.4G+5G, indicating that Wi-Fi
signals are emitted in both 2.4 GHz and 5 GHz bands.