Web-based Configuration Guide System Settings
161
In Local Device mode, choose Advanced > PoE Settings.
Set the power mode for the AP to accept power over PoE. In AF mode, the maximum
power supported by the device is 15.4 W. In AT mode, the maximum power is 30 W
according to the IEEE 802.3at standard. In BT mode, the maximum power is 51 W
according to the IEEE 802.3bt standard. By default, the device automatically negotiates
with the power sourcing equipment (PSE) about the power mode. The default
configuration is recommended.
5.3 Setting the Login Password
For RG-RAP2260(G), RG-RAP2260(E), RG-RAP6260(G), RG-RAP6262(G), RG-RAP2260(H), RG-
RAP6260(H), RG-RAP6260(H)-D, RG-RAP2266, RG-RAP2260, RG-RAP1261, RG-RAP1260 and
RG-RAP6262 models:
If the device works in self-organizing network mode, and Network mode webpage is
displayed, choose System > Login Password
In standalone mode: Choose System > Login > Login Password
For other RAP models:
In self-organizing network mode: Choose Network > Password
To Next Page
Loading...
Need help?
General
