Ruijie Reyee RG-RAP Series

Web-based Configuration Guide Network Settings
158
(1) Click Add.
(2) Enter the IPv6 address and DUID of the client.
(3) Click OK.
4.17.9 Configuring the IPv6 Neighbor List
In IPv6, Neighbor Discovery Protocol (NDP) is an important basic protocol. NDP replaces
the ARP and ICMP route discovery protocols of IPv4, and supports the following
functions: address resolution, neighbor status tracking, duplicate address detection,
router discovery, and redirection.
In Local Device mode, choose Security > IPv6 Neighbor List.