Web-based Configuration Guide Wi-Fi Network Settings
69
Caution
In the self-organizing network mode, the kick-off threshold settings will be synchronized
to all devices in the network.
3.15.9 Configuring the Roaming Sensitivity
For RG-RAP2260(G), RG-RAP2260(E), RG-RAP6260(G), RG-RAP6262(G), RG-RAP2260(H), RG-
RAP6260(H), RG-RAP6260(H)-D, RG-RAP2266, RG-RAP2260, RG-RAP1261, RG-RAP1260 and
RG-RAP6262 models:
Configure the master device. Choose Network ( WLAN) > Radio Frequency
Configure the slave device. Choose Devices > Select the target device in the
device list and click SN > Radio Frequency
For other RAP models:
Configure the master device. Choose WLAN > Radio Frequency
Configure the slave device. Choose WLAN > APs > Select the target device in the
device list and click Manage > WLAN > Radio Frequency
()The roaming sensitivity enables the device to actively disconnect a client from the Wi-Fi
network when the client is far away, forcing the client to re-select the nearest signal and
To Next Page
Loading...
