F11 User Manual
Copyright ©2022 Ruko All Rights Reserved.43
6.2 Pre-Flight Checklist
6.3 Calibration Before Flight
Whether the transmitter, intelligent flight battery, and mobile device
are fully charged.
Make sure that the aircraft arms are fully extended. Make sure that
the battery compartment cover is fastened firmly and the intelligent
flight battery is installed firmly.
Ensure that the propeller is free from damage, aging, deformation, no
foreign matter entanglement, and secure installation.
Please make sure that GPS is turned on to avoid that it would be lost,
please fly outdoor in an open place.
Whether the 4 motors can start normally after power-on, and wheth-
er the rotation speeds are consistent.
Connect drone WiFi with your phone, make sure that you have con-
nected the WiFi name RUKO-F11-XXXXXX "exactly after App access
right and Internet permission with your phone.
Make sure the camera is clean.
If you need to replace parts, be sure to use original parts. The use of
non-original accessories may cause danger to the safe use of the
aircraft.
For details on accessory support, please refer to the accessory sup-
port page in the appendix of the user manual.
Aircraft needs to carry out a series of calibration work before flying,
the main purpose is to avoid the accident that the aircraft loses con-
trol and crashes caused by the inaccurate GPS signal during the
flight.
To Next Page
Loading...
