Rule 360 GPH - Page 4

Float switch
only
Panel switch
only
CAUTION: Disconnect power from the system before working on the
unit to avoid personal injury, damage to the surrounding environment
and/or damage to the unit.
CAUTION: Always install proper fuse size to prevent damage to product
should a short occur. Failure to install proper fuse could increase risk of pump
malfunctionpotentiallyresultinginpersonalinjuryand/orrehazard.
CAUTION: Keep all wire connections above the highest water level. Wires
must be joined with butt connectors and a marine grade sealant to prevent
wire corrosion.
Float switch &
Panel switch
4
Standard Bilge Pump Wiring - 2 Wires