Need help?Do you have a question about the RunCam Eagle and is the answer not in the manual?
Connect the camera to a monitor using the 5D-OSD cable for initial setup and configuration.
Connect the camera to a transmitter for FPV flight, detailing power and video signal routing.
Access and configure core camera settings like image, day/night mode, video standard, and language.
Adjust image parameters such as WDR, brightness, and zoom for optimal video quality.
Configure advanced image parameters like 3D-NR, sharpness, and saturation for fine-tuning.
General| Megapixel | - MP |
|---|---|
| Camera type | Compact camera |
| Sensor type | CMOS |
| Image stabilizer | - |
| Image sensor size | 1/1.8 \ |
| Supported aspect ratios | 4:3 |
| Maximum image resolution | - pixels |
| Analog signal format system | NTSC, PAL |
| GPS (satellite) | No |
| Self-timer delay | - s |
| Signal-to-Noise Ratio (SNR) | 50 dB |
| Camera shutter type | Electronic |
| Material | Magnesium |
| Product color | Black |
| Compatible memory cards | Not supported |
| Display diagonal | - \ |
| Flash range (wide) | - m |
| Digital zoom | - x |
| Cables included | RCA |
| Product type | First Person View (FPV) camera |
Weight and Dimensions| Width | 26 mm |
|---|---|
| Height | 31 mm |
| Weight | 16 g |
To Next Page
