MODEL 51240B/53540B/53640B/61240B/63540B/63640B
Before the valve put into use, please fill in the below content so as to
help us to refer in the future.
The Program Type Setting (Operation by professional)
When all symbols light on, press and hold and buttons for 5
seconds to enter the menu of valve model selection. Please set the
program type in accordance with the product type.
Softener System Configuration
Tank Size：Dia. mm，Height mm；
Resin Volume L；Brine Tank Capacity L；
Hardness of Raw water mmol/L；
Pressure of Inlet Water MPa；
Control Valve Model ；Number ；
The Specification of Drain Line Flow Control ；
Injector No. .
Water Source: Ground-water □ Filtered Ground-water □
Tap Water □ Other .
Parameter Set
Control Mode
A-01/02(63640B/53640B)
Water Treatment Capacity
(63640B/53640B)
Operation Days (63540B/53540B)
To Next Page
Loading...
Need help?
General
