MODEL 51240B/53540B/53640B/61240B/63540B/63640B
33
Note: ①The above data in table is tested under pressure of 0.3MPa.
②Since the different in the quality of raw inlet water, capacity of
resin, size of the tank and the pressure of inlet, the above data are only for
reference.
③If the real goods are different in specification, configuration or
appearance, please subject to the real goods.
④The hole is made depending on the size of matched tank practical
application. The hole’s numbers and size are made based on the above
table.
To Next Page
Loading...
Need help?
General
