Runxin F79A-LCD - Parameter Setting

MODEL 82602-F79A-LCD/82602B-F79B-LCD/82604-F82A-LCD/82604B-F82B-LCD
32
3.5.2.Parameter Setting
In program display mode, press or to adjust the value.
The steps of parameter setting
Item
Process Step
Symbol
Set 12/24
Hr Clock
When light on, press and hold
and for 5 seconds until the
light off.
1. Press to enter into the setting
interface. The option of “Set 12/24 Hr
Clock” will be selected by system
automatically.
2 ． Then press “ ”, the setting
interface will display as the right
figure.
3．Through or to choose 12
Hr or 24 Hr.
4．Lastly, press and hear a sound
“Di”, then finish adjustment.
Set Clock
1. In setting status, press “ ”or “ ” to
select “Set Clock”.
2. Press , the setting interface will
display as the right figure. Then press
“ ”or “ ” to set the time.
3. Lastly, press and hear a sound
“Di”, then finish adjustment.
Set
Gal./L/ m
3
1. In setting status, press “ ”or “ ” to
select “Set Gal./L/ m
3
”.
2. Press , the setting interface will
display as the right figure. Then press
“ ”or “ ” to choose the unit.
3. Lastly, press and hear a sound
“Di”, then finish the adjustment.