Runxin RL-R150 - Water Hardness Setting; User Mode and Process Display; User Mode Overview; Process Display Examples

Page 9 of 12
How to Change Regeneration Cycle Minutes
Backwash
– Unlock Valve – Press Up & Down arrow together for 5 secs until you hear
a beep.
– Press the Menu Button.
– Press down arrow five times.
– The hourglass and the backwash symbol will light up, press menu,
the time will flash, press the up and down arrows to change to 8mins
– Press menu to confirm
Brine Draw
– Once Backwash is set, Press down
– The Hourglass and the Brine Draw symbol will light up, press menu,
the time will flash, press the up and down arrows to change to 49mins
– Press menu to confirm
Brine Refill
– Once Brine Draw is set, Press down
– The Hourglass and the Brine Refill symbol will light up, press menu,
the time will flash, press the up and down arrows to change to 7mins
– Press menu to confirm
Fast Rinse
– Once Brine Refill is set, Press down
– The Hourglass and the Fast Rinse symbol will light up, press menu,
the time will flash, press the up and down arrows to change 5mins
– Press menu to confirm