Runxin RL-R150 - Parameter Setting; Time of Day Setting; Regeneration Time Setting

Page 8 of 12
How to change Regeneration Days Override
– Unlock Valve – Press Up & Down arrow together for 5 secs until you hear
a beep.
– Press the Menu Button.
– Press down arrow four times.
– H-## will be on the screen. (This is the current setting for the days
override
– Press the Menu Button
– The Digits will then flash change the number to desired number of days
by pressing the up or Down button & press Menu to save.
Set Water softener Capacity
– Unlock Valve – Press Up & Down arrow together for 5 secs until you hear
a beep.
– Press the Menu Button.
– Press down arrow four.
– An hourglass and a m³ symbol will light up
– Press Menu Button
– The digits will then flash, change the number to the amount of capacity
estimated for the ion exchange process in litres the softener will
produce eg:
Feed hardness
(ppm)
Total Capacity
(m³)
50ppm
34m³
70ppm
24 m³
90ppm
18.8 m³
120ppm
14.1 m³
150ppm
11.3 m³
200ppm
8.5m³
250ppm
6.8 m³