A: Left Ear
B: Right Ear
C: Charging Point
D: Micro-USB Charging
PAIRING YOUR EARPHONES
Tum on the two earphones. (with a power-on prompt), and after about 5 seconds, the two earphones
will automatically pair (with a pairing prompt).After the pairing is successful, the red and blue lights
alternately flash for the main ear, and the off light is the secondary ear, Then turn on the Bluetooth
device of the mobile phone search for the pairing name and click Connect to use the pairing mode
(After the connection is successful and in the working state, neither headset light up).
SHUTTING DOWN YOUR EARPHONES
1. Put the headset into the charging box. At this time the indicator light of the headset is always red,
the indicator light of the charging box is blue.
2. Press and hold the key of the two earphones at the same time for ablut 3 seconds, At this time
the red light is on to turn off the earphones;
3. When the earphones is disconnected from the phone for more than 5 minutes, the earphones will
automatically turn off
EARPHONES MASTER-SLAVE FREE SWITCHING
1. After the earphones are successfully paired with the mobile phone for the first time, you can use
any single ear or both ears when you use it again. The earphone will automatically switch
between the primary and t n e secondary ear without re-pairing.
2. After t he Left and right earphones are In t he TWS pairing mode, double-click any pair of
earphones to pair, and double-click the earphones to make it the main earphone. After the pairing
is successful red and t he blue lights will start alternately flashing.
3. After pairing the left and right earphones with TWS, double- click any of the earphones again to
clear the TWS pairing. If the left and right earphones cannot be paired, please clear the pair of left
and right earphones first and then re-do the TWS pairing operation.
USING YOUR EARPHONES AGAIN
1. Take out the single· earphones or both earphones from the charging case, and the earphone will
automatically connect back to the last time the phone is connected .
2. If t he earphones are powered off or not in the charging case, put the earphones back into the
charging case to activate them and then take out again; or press. and hold the earphones mu
malfunction key to turn the·m on, the earphones will automatically connect back with the mobile
phone.
CHARGING YOUR EARPHONES
1. To charge the earphones: Put the earphones into the charging case separately the red light of the
earphones and the blue light of the charging case always be turned on indicating that the
charging is in progress, and the indicator light will be turned off after the charging is completed.
2. To charge the charging case: Insert the Micro-US B charging cable to charge the charging case.
During the charging process the red indicator light flashes-J and the red light will remain on aft:er
the charging is completed.
SPECIFICATIONS
Bluetooth Version: 5.0
Bluetooth Protocol: HSPt HFP, A2DP’, AVRCP
Working Distance: 10m / 33Ft
To Next Page
Loading...