Connection to the mains supply
Check that the voltage marked on the appliance
corresponds with the supply voltage.
The appliance must be earthed. It’s supplied with
three-core mains lead and a 13A plug complying with
BS1363. If the fuse needs replacing, use a 3A ASTA or
BSI approved fuse conforming to BS1362.
This appliance conforms to EC Directive 92/31/EEC with
respect to Electromagnetic Compatibility
If the plug needs replacing
Connect the Green/Yellow wire (Earth) to the terminal
marked E or . Connect the Blue wire (Neutral) to the terminal marked N.
Connect the Brown wire (Live) to the terminal marked L. Fasten the cord grip
securely. If in doubt consult an electrician.
If the plug supplied is non-rewireable (moulded)
Don’t use the plug unless the fuse cover is in place. If you need to
remove the plug, cut it from the mains lead and dispose of it. To
avoid electric shock, don’t re-use the plug or put it into a socket.
10
To Next Page
Loading...
