Russell Hobbs 25280-56

4
Read the instructions, keep them safe, pass them on if you pass the appliance on. Remove all packaging
before use.
IMPORTANT SAFEGUARDS
Follow basic safety precautions, including:
This appliance can be used by persons with reduced physical, sensory or mental
capabilities or lack of experience and knowledge if they have been supervised/
instructed and understand the hazards involved. Children must not use or play
with the appliance.Keep the appliance and cable out of reach of children.
c To avoid injury, take care handling the blades, emptying the jug, and cleaning.
h Don’t add hot liquid (over 40°C), as it may be ejected due to sudden steaming.
Misuse of the appliance may cause injury.
Unplug the appliance before assembly, disassembly, or cleaning.
Don’t leave the appliance unattended while plugged in.
If the cable is damaged, it must be replaced by the manufacturer, its service
agent, or someone similarly qualied, to avoid hazard.
• Don’t put the motor unit in liquid.
• Switch o (0) before tting the bowl to the motor unit.
• Switch o (0), and wait till the blades come to a stop before removing the lid from the bowl, or
removing the bowl from the motor unit.
• Don’t put utensils into the jug while the appliance is plugged in.
• Don’t use accessories or attachments other than those we supply.
• Don’t use the appliance for any purpose other than those described in these instructions.
• Don’t operate the appliance if it’s damaged or malfunctions.
• Don’t run the motor continuously for more than 1 minute, it may overheat. After 1 minute switch o
for at least 2 minutes, to recover.
HOUSEHOLD USE ONLY
PARTS
1. Speed control
2. Motor unit
3. Spindle
4. Bowl
5. Chopping blade
6. Disc
7. Lid
8. Tab
9. Tube
10. Pusher
` dishwasher safe
BEFORE USING FOR THE FIRST TIME
Turn to “CARE AND MAINTENANCE” and clean the appliance, to remove manufacturing dust, etc.
GENERAL OPERATION
1. Sit the motor unit on a dry, rm, level surface.
2. Route the cable so it doesn’t overhang, and won’t trip or catch.
3. Assemble the unit, and t any accessories requried according to how you want to use it.
4. Check that the speed control is set to O.
5. Put the plug into the power socket (switch it on, if it’s switchable).
6. Move the speed control to the 1 or 2 position to operate your food processor.
7. Switch the appliance o by moving the speed control to the 0 position and unplug it.
8. Hold the speed control in the Y position to operate your food processor in short, controlled bursts.
9. Release the control to stop.