What to do if my Russell Hobbs RHMP700 doesn't turn on?
If your Russell Hobbs Food Processor doesn't turn on, first, ensure the appliance is plugged into a working outlet. Also, check that the blender jug is securely in place.
Why is the mixture in my Russell Hobbs RHMP700 Food Processor blender not blending properly?
If the mixture in your Russell Hobbs Food Processor blender isn't blending well, it could be due to insufficient liquid or too much ice. Turn off the blender, redistribute the food with a rubber spatula, add some liquid, and pulse the mixture to help it blend.
Why are sliced foods uneven and slanted in my Russell Hobbs RHMP700 Food Processor?
Uneven and slanted sliced foods from your Russell Hobbs Food Processor can occur if the feed chute isn't well-packed or if uneven pressure is applied to the food pusher during processing. Cut pieces in even lengths, slightly shorter than the feed chute, pack the chute carefully, and maintain even pressure on the food pusher while processing.
Why is liquid leaking from the bottom of my Russell Hobbs RHMP700 Food Processor workbowl?
If liquid is leaking from the bottom of your Russell Hobbs Food Processor's workbowl, it could be due to processing too much liquid. Try processing smaller amounts, and when working with liquids, do not exceed 3 cups in the workbowl. Also, remember not to remove the blade before removing the workbowl from the processor when processing liquids.
How to fix unevenly chopped food in my Russell Hobbs Food Processor?
To fix unevenly chopped food when using your Russell Hobbs Food Processor: * Process smaller amounts for more even results. * Use the PULSE button in short, 5-second increments or less, allowing the blades to stop completely between pulses. * Cut food into uniformly sized pieces before placing them in the processor.
Why is liquid leaking from the bottom of my Russell Hobbs RHMP700 Food Processor jug?
If liquid is leaking from the bottom of your Russell Hobbs Food Processor jug, the gasket might be either missing or not correctly placed. Check that the jug is assembled correctly.
What to do if soft cheese collects on top of the slice/shred disc in my Russell Hobbs Food Processor?
If soft cheese collects on top of the slice/shred disc in your Russell Hobbs Food Processor, ensure the cheese is well-chilled, or place it in the freezer until a knife can penetrate about 12mm. Remember to use the food pusher as a guide and avoid exerting hard pressure on it.
How to remove the jug bottom that does not come off the Russell Hobbs Food Processor jug?
If the jug bottom of your Russell Hobbs Food Processor does not come off the jug, a vacuum may have formed. Place the jug on the blender, hold the base steady, and turn it counterclockwise until the jug is released from the bottom.
Why do some pieces of food remain on top of the slice/shred disc in my Russell Hobbs RHMP700 Food Processor?
It's normal for some food pieces to remain on top of the slice/shred disc in your Russell Hobbs Food Processor. You can slice or shred these pieces by hand or save them for another use, such as in soups that will be pureed.
General| Number of Speed Settings | 2 |
|---|---|
| Bowl Material | Plastic |
| Pulse Function | Yes |
| Dishwasher Safe Parts | Yes |
| Speeds | 2 speeds |
To Next Page