EasyManua.ls Logo

Russell Hobbs 26200

Russell Hobbs 26200
8 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4
PARTS
1. Anti scale filter
2. Lid
3. Lid release
4. Infuser
5. Opening
6. Base unit
7. Touch controls and display
8. Select/confirm knob
CONTROLS AND LED DISPLAY
To activate a function, touch its icon. The icon will light up brightly and the remaining
icons will be dimly lit to show that they are available for use.
The LED display shows the water temperature, the selected water temperature or the
steeping/keep warm time depending on the mode your kettle is in.
Your kettle will revert to the standby mode if no controls are touched or settings
changed within 5 minutes. You can also select standby mode at any time by touching
the C icon.
PREPARATION AND FILLING
1. Put the base unit on a stable, level surface.
2. Plug the base unit into the wall socket.
3. Remove the kettle from the base unit and press the lid release button.
4. Fill with at least 0.5 L of water, but not above the MAX (1.7 L) mark.
5. Close the lid, and press down to lock it.
6. Place the kettle onto the base unit.
BOILING WATER 100ºC
1. If your kettle is in standby mode, tap the C icon.
2. Tap the K icon.
3. The numerical display will show the current water temperature which will start to
rise as your kettle starts to boil the water.
4. When the temperature of the water reaches 10C (boiling) your kettle will switch
off.
5. To cancel at any time you can tap the cancel Bicon, or lift the kettle off the base.
HEATING WATER TO A SELECTED TEMPERATURE
Your kettle’s variable temperature mode allows you to tailor the water temperature to
suit specific teas, coffee and even baby food and milks. The range is adjustable from
40-100ºC.
Heating water to a precise temperature depends on several factors. One of these is the
amount of water you are trying to heat. The final temperature of a small quantity of
water may overshoot the desired temperature. If it is important that the temperature of
the water is exact, we recommend using the Keep Warm feature of your kettle which
will allow the temperature of the water to stabilise naturally.

Related product manuals