5
1. If your kettle is in standby mode, tap the C icon.
2. Tap the M icon.
3. The numerical display will show the last selected water temperature.
4. Turn the select/confirm knob until the desired temperature is displayed.
5. Press the select/confirm knob G to start heating the water.
6. To cancel at any time you can tap the cancel Bicon, or lift the kettle off the base.
TEMPERATURE GUIDE
Tea Type Temperature °C Brewing time (min)
Black 90 – 100 3 - 5
Oolong 70 – 80 2 – 3
White tea 70 – 80 1 – 3
Green tea 70 – 85 1 - 3
Rooibos 90 – 100 5 - 6
Hibiscus 70 – 75 5 - 7
Pu-erh 80 – 100 2 - 5
Mate 90 – 100 5 - 6
Herbal/Fruit 90 – 100 3 - 5
Coffee Temperature °C Brewing time (min)
Instant coffee 85 - 95 -
Filter ground coffee 80 - 90 -
For baby milk/formula, follow the manufacturer’s instructions, or local health authority
guidance.
USING THE INFUSER AND STEEP TIMER
The steep timer allows you to time infusions when using the infuser accessory. You
must first heat the water to the desired temperature see HEATING WATER TO A
SELECTED TEMPERATURE. The timer can be set from 1 to 40 minutes.
Note: When using the infuser, only fill your kettle to the 1.5L marking. This will allow
room for the infuser and its contents when you insert it into the kettle, and prevent
water from being displaced out of the spout.
1. Prepare the infuser accessory by putting the desired amount of tea leaves into it.
2. When the water reaches the desired temperature, open the lid and put the infuser
into your kettle. The opening in the infuser should face the handle.
3. Tap the N icon.
To Next Page
Loading...
