6
USING THE TIMER
1. Set the timer to the time you want to start brewing.
• Press and hold the T/AUTO button for 3 seconds. The T/AUTO light will
start flashing.
• Use the h and min buttons to set the correct hour and minute.
• Once the desired time is displayed press the T/AUTO button again. The T/
AUTO light will stop flashing and stay on. This indicates the time is set.
2. At the time you set, your coffee maker will start up.
3. To cancel the timer before brewing has started, press the T/AUTO button
again.
NOTES
• Don’t be tempted to reheat coffee in the appliance. You’ll damage the
appliance and the coffee will be undrinkable.
• Clean the filter holder after each use. Residue from a previous brew will spoil
your coffee.
• The time will need to be reset if the unit is unplugged or power is interrupted.
• Be careful when opening the cover after brewing as this area is hot and steamy.
Use the lift tab located on the front of the lid.
CARE AND MAINTENANCE
1. Unplug the appliance and let it cool.
2. Tip the contents of the filter holder into the bin.
3. Clean the outside surfaces of the appliance with a damp cloth.
4. You may clean the travel mug, permanent filter and filter holder in warm soapy
water. Rinse thoroughly afterwards, to remove all traces of soap.
` You may wash these parts in a dishwasher.
¬ You may wash these parts in the top rack of a dishwasher.
DESCALE REGULARLY
Descale the appliance at least monthly with a proprietary descaler. Follow the
instructions on the package of descaler.
Products returned under guarantee with faults due to scale will be subject to a repair
charge.
To Next Page
Loading...
