9
THERMAL CUT-OUT
The cut-out operates to protect the element from overheating.
If your fryer stops working:
1. Switch off, unplug, and let it cool down.
2. Check the oil level.
3. If the oil level is below the MIN mark, reset the cut-out.
4. If the oil level isn’t too low, and the cut-out has operated for some other reason, ring
Customer Service.
5. Press the reset button and reset the cut-out.
6. The excess heat will have spoiled the oil, so clean out the bowl and rell with fresh oil.
To Next Page
Loading...
