Russell Hobbs DIGITAL SUPREME RHC570 - Initial Setup and Preparation; Before First Use

3
BEFORE USING FOR THE FIRST TIME
• Fill the water tank with clean water, and then empty the water to ensure the tank is clean of
any manufacturing residues. Rell the tank.
• The iron may give off an odour and small amount of vapour when switched on for the rst
time. This is normal and will stop as the element cures.
• Press the
burst of steam button 3 or 4 times, to prime and ush clean water through the
burst of steam pump.
• Press the
cool spray mist button 3 or 4 times, to prime and ush clean water through the
cool spray mist pump.
• Iron an old piece of dampened cotton fabric or linen, to clean the soleplate.
CAUTION: HOT SURFACES
PARTS
1. Temperature conrtol
2. Soleplate
3. Heel
4. Light
5. Steam control
6. Water inlet
7. Cover
8. Spray nozzle