Russell Hobbs EASY STORE PRO RHC1100

3
BEFORE USING FOR THE FIRST TIME
• Fill the water tank with clean water, and then empty the water to ensure the tank is clean of
any manufacturing residues. Rell the tank.
• The iron may give off an odour and small amount of vapour when switched on for the rst
time. This is normal and will stop as the element cures.
• Press the
burst of steam button 3 or 4 times, to prime and ush clean water through the
burst of steam pump.
• Press the
cool spray mist button 3 or 4 times, to prime and ush clean water through the
cool spray mist pump.
• Iron an old piece of dampened cotton fabric or linen, to clean the soleplate.
H B
j
k
l
m
e
f
i
max
o
max
ng
1. Temperature control
2. Swivel cord
3. Light
4. Steam control
5. Cover
6. Water inlet
7. Spray nozzle
8. Soleplate
9. Marker
10. Heel
11. Plug and wind
(See page 6)
Full icons for Steam dial