3
BEFORE USING FOR THE FIRST TIME
• Fill the water tank with clean water, and then empty the water to ensure the tank is clean of
any manufacturing residues. Rell the tank.
• The iron may give off an odour and small amount of vapour when switched on for the rst
time. This is normal and will stop as the element cures.
• Press the
burst of steam button 3 or 4 times, to prime and ush clean water through the
burst of steam pump.
• Press the
cool spray mist button 3 or 4 times, to prime and ush clean water through the
cool spray mist pump.
• Iron an old piece of dampened cotton fabric or linen, to clean the soleplate.
CAUTION: HOT SURFACES
1. Light
2. Temperature control
3. Water inlet
4. Cover
5. Spray nozzle
6. Soleplate
7. Steam control
8. Heel
9. Index mark
10. Steam vents
11. Water tank
max
1 97
3
4
5
26 10
8
11
To Next Page
Loading...
