- Tap may be off.
- Mains water may be cut-off.
- If so, switch the programme knob
to position 0. You can select a
programme and run your machine
after the mains water is supplied.
- Mains water pressure may be low.
- Water inlet hose may be twisted.
- Water inlet hose may be clogged.
- Clean water inlet hose filters.
- Valve inlet filter may be clogged.
- Clean the valve inlet filters.
If the problem persists, unplug your
machine, turn off your faucet and
contact the nearest authorised
service.
- Pump filter may be clogged. Clean
the pump filter.
- Discharging hose may be clogged
or twisted. Check the discharging
hose.
If the problem persists, contact the
nearest authorised service.
To Next Page
Loading...
