Bulb Replacement
To replace the internal LED bulbs, please follow the below instructions.
The required rating is: (DC) 12V LED.
It recommended that a qualified engineer or electrician replaces the
bulb
1. Unplug the appliance.
2. Push and remove the cover from the light.
3. Then remove the screws and the back cover of the lamp. You will
now be able to remove the LED bulbs, but you must ensure the
bulbs are cool to touch.
4. Replace the LED bulbs and reassemble the back cover. Slot the
lampshade back into the appliance.
Reversing the Door
Door cannot be reversed.
Back cover
For Customer Services & Spare Parts please call 0345 208 8750
Opening times: Monday - Friday 8am – 8pm & Saturday 9am – 1pm
or visit us at www.productcare.co.uk
13
LED bulbs
Transparent
cover
To Next Page
Loading...
