Positioning
• Be sure the thickness of the work surface is at least 30mm
• You must have a gap of a minimum gap of 25mm between the underside of the
appliance and any surface below it.
Note:
• Select heat-resistant work surface material to avoid larger deformation
caused by the heat radiation from the appliance.
• To install a hob above an oven, the oven must have forced ventilation.
• Check the dimensions of the oven when being installed with the hob
For Customer Services & Spare Parts please call 0345 208 8750
Opening times: Monday - Friday 8am – 8pm & Saturday 9am – 1pm
or visit us at www.productcare.co.uk
8
To Next Page
Loading...
