Why is my Russell Hobbs Hob badly ignited?
A poorly ignited Russell Hobbs Hob can be due to several factors. Check that the burner cover is correctly assembled and the gas supply is open. If the burners are wet, dry the burner cup, flame spreader, and burner cover. Also, inspect the burner spreader and igniter for clogs and clean them if necessary.
What to do if my Russell Hobbs RH60GH402B Hob is not ignited?
If your Russell Hobbs Hob isn't igniting, there are several potential causes. First, ensure the hob is properly connected to the electricity supply. Check that other kitchen appliances are working or inspect the fuse box to confirm the hob's fuse is functional. Also, make sure the burner cover is correctly assembled and that the gas supply is open.
General| Hob type | Gas |
|---|---|
| Frame form | Direct |
| Product color | Black |
| Top surface type | Glass |
| Appliance placement | Built-in |
| Cooking zone 1 type | Large |
| Cooking zone 2 type | Simmer |
| Cooking zone 4 type | Regular |
| Cooking zone 1 power | 2500 W |
| Cooking zone 2 power | 1000 W |
| Cooking zone 3 power | 1750 W |
| Cooking zone 3 shape | Round |
| Pan support material | Cast iron |
| Cooking zone 1 position | Left rear |
| Cooking zone 2 position | Left front |
| Cooking zone 3 position | Right rear |
| Cooking zone 4 position | Right front |
| Number of cooking zones | 4 zone(s) |
| Number of electric cooking zones | 0 zone(s) |
| Number of simultaneously used cooking zones | 4 |
| Control type | Rotary |
| Built-in display | No |
| Control position | Top front |
| Electronic ignition | Yes |
| Connected load (electric) | - W |
Weight and Dimensions| Depth | 510 mm |
|---|---|
| Width | 590 mm |
| Height | 95 mm |
Steps for preparing the installation site and fitting the hob into the worktop.
Guidelines and requirements for connecting the gas supply to the hob.
Instructions for safely connecting the hob to the mains electricity supply.
Guidance for detecting and handling gas leaks or smells.
To Next Page
