Russell Hobbs RH60IH401B

28
Failure code Problem Solution
Auto-Recovery
E1
Supply voltage is above the rated
voltage.
Please inspect whether
power supply is normal.
Power on after the power
supply is normal.
E2
Supply voltage is below the rated
voltage.
E3
High temperature of ceramic plate
sensor
Wait for the temperature of
ceramic plate return to
normal.
Touch “ON/OFF” button to
restart unit.
E4
High temperature of ceramic plate
sensor.
E5
High temperature of IGBT .
Wait for the temperature of
IGBT return to normal.
Touch “ON/OFF” button to
restart unit.
Check whether the fan runs
smoothly;
if not , then
contact customer services.
E6
High temperature of IGBT
No Auto-Recovery
F3/F6
Ceramic plate temperature sensor
failure.
Contact customer services
F4/F7
Ceramic plate temperature sensor
failure.
F5/F8
Ceramic plate temperature sensor
failure.
F9/FA
Temperature sensor of the IGBT failure.
FC /FD
Temperature sensor of the IGBT failure.
Fault codes:
The hob is equipped with a self diagnostic function and the table below shows the
fault codes and the actions that should be taken.