For Customer Services & Spare Parts please call 0345 208 8750
Opening times: Monday - Friday 8am – 8pm & Saturday 9am – 1pm
or visit us at www.productcare.co.uk
9
Installation
• After installation, do not switch the power to the refrigerator on for at
least 3 hours. The coolant within the product needs time to settle after
it has been transported and put in to position, failure to do this will
affect the cooling performance of your appliance.
• The unit should be kept away from direct sunlight.
• Remove all transport tapes and foam protection pieces . Clean the
interior of the appliance with a cloth dampened in lukewarm soap and
water. Wipe with clear water and wipe dry.
• When the appliance has been positioned, adjust the two front feet to
ensure the unit is stable. This is essential to ensure quiet running and
proper door opening /closing. See figure below.
To Next Page
Loading...
