25. Do not run the motor for more than 2 minutes, either continuously, or using
the pulse setting, otherwise it may overheat. After 2 minutes use, switch it off
for at least 2 minutes allowing it to cool to room temperature and allowing it
recover.
26. Do not use the blender for any purpose other than those described in these
instructions.
27. Do not run the blender empty, as it mayoverheat.
28. Do not operate the blender after it malfunctions. If the mains lead or plug is
damaged, return the blender to the manufacturer in order to avoid any
hazard.
29. Children should be supervised to ensure thatthey do not play with the appliance.
30. Always turn the power off at the power outlet before you remove the plug.
Remove by grasping the plug. Do not pull on the electricalcord.
31. This appliance is designed for processing household quantities; it is not
suitable for commercial purposes. Use the appliance only for the purpose it
was designedfor.
32. Do not use this appliance if it or parts of it show visible damage or if the
appliance has beendropped.
33. Do not attempt to make any modifications to thisappliance.
34. To avoid any risk and to remain within warranty, repairsto this appliance must
be carried out by an authorised service agentonly.
35. To reduce the risk of injury, never place the blade assembly on the base
without the jar properlyattached.
36. If the supply cord is damaged, it must be replaced by the manufacturer, its
authorised service agent or similarly qualified persons in order to avoid any
hazard.
37. Switch off the appliance and disconnect from the power supply before
changing accessories or approaching parts that move when inuse.
38. Use only accessories provided by the manufacturer for thisappliance.
39. Do not run this appliance with an external timer or remote controlsystem.
To Next Page
Loading...
