5
BEFORE FIRST USE
• All parts of the blender need to be thoroughly cleaned before being used for the rst time.
See "cleaning" section for disassembly instructions.
ASSEMBLY OF THE GLASS JUG
• Invert the glass jug onto a level surface.
CAUTION: Be careful when handling the blade assembly.
• Fit the seal ring on to the blade assembly.
• Insert the blade assembly (with the seal ring tted) into the black outer ring and turn it
anti-clockwise until tight. The black outer ring is xed to the jug and cannot be removed.
NOTE: Do not attempt to remove the black outer ring from the glass jug as it will only
damage the jug and ring assembly.
• Reposition the jug with its opening upwards.
• Place the measuring cap into the lid. Place the lid onto the jug with the large round tab
covering the puring spout and the small round tab aligned with the handle.
To Next Page
Loading...
