5
HOW TO REMOVE THE BLADES
CARE AND MAINTENANCE
CAUTION:
Electrical Shock Hazard: Do not immerse the electric knife handle or cord in water or other
liquid.
Note: To avoid damaging the electric knife, do not use abrasive cleaners or scouring pads.
2
1
4
1
2
3
With the serrated edges
down, press the left side of
the safety lock pin so that it
extends towards Lock
.
Make sure safety lock pin is
in Lock
position, knife is
unplugged, and blades are
removed.
Grip the blades by the
grip tabs and pull away from
the knife handle.
Unplug power cord.
Wash blades, carving fork,
and storage case with hot
water and dish soap or in the
dishwasher (top rack only).
Press the blade release
button on the knife handle,
located just behind the
grip tabs on the blades.
Clean knife handle and cord
with a damp cloth or sponge.
To Next Page
Loading...
