PRESET (DELAYED START) FUNCTION
If you do not want the cooking cycle to start immediately, you can preset the cooking
menu and time. By doing this, your cooking selection will automatically start at a time
you prefer. This can be done in two steps:
1. Setting the current clock;
2. Setting the cooking menu and time.
For example, now it is 12:30. If you would like for the oven to start automatically at
100P microwave power for 9 minutes and 30 seconds but only do so at 14:20. Follow
these steps:
Step 1 – Setting the current clock
1. In standby mode, press the Preset. Clock button. The display will show “00:00”.
2. Set hours by pressing the Time. Weight button. The display will show “12:00”.
3. Press the Preset. Clock button again to confirm the hours.
4. Set the minutes by pressing the Auto Cooking/ Time. Weight button. The display
will show 12:30.
5. Press the Preset. Clock button once or wait for five (5) seconds to confirm the
selection.
Step 2 - Set the cooking menu and time
6. Select the cooking power by pressing the Micro Power button. The display will
show 100P.
7. Press the Auto Cooking/ Time. Weight button to set the amount of cooking time
required. The display will show 09:30
8. Press and hold the Clock button for three (3) seconds to return to the current
clock.
9. Set the time you expect to start. Repeat the steps 2-4.
To Next Page
Loading...
