Russell Hobbs RHFP5000 User Manual

12
the food processor running.
• To minimise slender foods, such as carrots or celery, from falling
over in the feed chute, cut food into several pieces and pack the
feed chute with the food.
• Apply light pressure on the pusher for soft foods (berries and
tomatoes) and slightly more pressure for hard foods (onions and
potatoes).
• Do not process foods that are too frozen or hard. Make sure that
the tip of a knife can be inserted into the food before processing.
• If hard food, such as a piece of carrot, becomes wedged or stuck on the blade, stop the
food processor and unplug, then remove the blade. Gently remove the food from the
blade.
• When chopping sticky dried fruits, place the fruits in the freezer for about 10 minutes and
add a little our or sugar to keep the pieces from sticking together.
• When preparing cake or cookie batter, use the S blade to cream fat and sugar rst and
add dry ingredients last. Place nuts and fruit on top of the our mixture to prevent over
chopping. Process nuts and fruits using short pulses to blend with other ingredients.
• When using the discs, do not let the food accumulate too high (over 2/3 full); stop and
empty the workbowl.
• Do not use the food processor to:
- Grind coffee beans, bones, grains or hard spices
- Liquefy fruits and vegetables
- Slice or chop warm meat
CARE AND MAINTENANCE
This product contains no user serviceable parts. Refer service to a qualied service
professional.
IMPORTANT: Always unplug your processor from the outlet before cleaning.
IMPORTANT: Blades are sharp. Handle blades and discs carefully.
• Completely disassemble processor parts before washing.
• Rinse parts immediately after processing for easier cleaning.
• Wipe base and feet with a damp cloth and dry thoroughly.
Stubborn spots can be removed by rubbing with a damp cloth
and a mild, nonabrasive cleaner. Do not immerse base in liquid.
• All removable parts can be washed by hand. The removable
parts can be washed in the dishwasher, top rack only (P). Hand-
washing of plastic parts will help to maintain the food processor’s appearance.
• For further instructions on how to disassemble the centre post for cleaning, see ‘INSERT
AND REMOVE THE CENTRE POST’ on page 6.
• Some staining of parts may occur. If so, make a paste of 2 tablespoons of baking soda and
1 tablespoon of water. Apply to stains and let stand overnight. Rinse and dry.
• Do not use rough scouring pads or cleansers on any plastic or metal parts.
• Do not allow blades or discs to soak in water for long periods of time.
11
• Apply light pressure on the pusher for soft foods (berries and tomatoes) and slightly
more pressure for hard foods (onions and potatoes).
• Do not process foods that are so frozen or hard that the tip of a knife cannot be inserted into
the food.
• If a piece of hard food, such as a carrot, becomes wedged or stuck on the blade, stop
the processor and unplug, then remove the blade. Gently remove food from the blade.
• When chopping sticky dried fruits, place the fruits in the freezer for about 10 minutes and add
a little our or sugar to keep the pieces from sticking together.
• When preparing cake or cookie batter, use the S blade to cream fat and sugar rst and
add dry ingredients last. Place nuts and fruit on top of our mixture to prevent over
chopping. Process nuts and fruits using short pulses to blend with other ingredients.
• When using the slicing/shredding disc, do not let the food accumulate too high
(over
2
/
3
full); stop and empty the workbowl.
• Do not use the processor to:
- Grind coee beans, bones, grains or hard spices
- Liquefy fruits and vegetables
- Slice or chop warm meat
CARE AND CLEANING
This product contains no user serviceable parts. Refer service to a qualied service professional.
Important: Always unplug your processor from the outlet before cleaning.
CLEANING
Important: Blades are sharp. Handle blades and discs carefully.
• Completely disassemble processor parts before washing.
• Rinse parts immediately after processing for easier cleaning.
• Wipe base and feet with a damp cloth and dry thoroughly.
Stubborn spots can be removed by rubbing with a damp
cloth and a mild, nonabrasive cleaner. Do not immerse
base in liquid.
• All removable parts can be washed by hand. The removable
parts can be washed in the dishwasher, top rack only (P).
Hand-washing of plastic parts will help to maintain the food processor’s appearance.
• Some staining of parts may occur. If so, make a paste of 2 tablespoons of baking soda
and 1 tablespoon of water. Apply to stains and let stand overnight. Rinse and dry.
• Do not use rough scouring pads or cleansers on any plastic or metal parts.
• Do not allow blades or discs to soak in water for long periods of time.
• Remember to clean the internal shafts of the chopping blades. Use a brush to remove
any residual food particles.
• If you are having trouble closing the lid over the large workbowl, apply a small amount
of vegetable oil to the rim of the lid and workbowl. This should make the pieces work
more smoothly.
P

Russell Hobbs RHFP5000 Specifications

General

Brand	Russell Hobbs
Model	RHFP5000
Category	Food Processor
Language	English