ADDITIONAL SAFEGUARDS
Always unwind and straighten the power cord before use.
Disconnect the iron from the mains supply outlet when filling with water.
Remove the water remaining in the water tank when finished using the iron. Be
careful, this water may be hot.
Do not leave the iron unattended when it is connected to the mains supply outlet.
Do not add perfumed, vinegar or other chemical liquids into the water tank, they
can damage the iron.
Do not roll the power cord around the iron for storage until it has cooled down
completely.
PARTS DIAGRAM
1. Soleplate
2. Temperature Dial
3. Temperature Dial Pointer
4. Pilot Light
5. Water Inlet Hole
6. Spray Nozzle
7. Steam Control/Self-Cleaning
Knob
8. Spray Button
9. Burst of Steam Button
To Next Page
Loading...
