Russell Hobbs RHMO43 - Spare Parts

Problem
Potential reason
Potential solution
Too noisy
1. Glass turntable
fitted
incorrectly
Check that the glass turntable has been
placed correctly on the turntable and is not
hitting the walls/doors of the microwave
during operation.
2. Dishes/plate are
too
large for the
microwave
Check that the dishes/plates are the correct
size for the microwave and that they are not
hitting the walls/door of microwave during
operation.
Door not shutting/
locking
1. Glass turntable
fitted
incorrectly
Check that the glass turntable has been
placed correctly on the turntable and is not
stopping the door from shutting correctly.
Turntable not
rotating
1. Turntable coupling
not fitted or tape not
removed
Check that the turntable coupling is fitted
correctly and the transportation tape has
been removed.
2. Turntable roller
ring not fitted or fitted
incorrectly
Check that the turntable roller has been
placed under the turntable and that it is
position correctly.
3. Glass turntable
fitted
incorrectly
Check that the glass turntable has been
placed correctly on the roller ring and is
properly engaged with the coupling.
Turntable ring
Glass turntable
Turntable coupling
21
SPARE PARTS