and the glass of the jug could crack.
ADDING INGREDIENTS INTO THE BLENDER
Ensure that larger pieces of food are cut into small pieces before blending. Their
approximate size should be 2 cm × 2cm × 2cm.
If you need to add solid ingredients after you have started blending:
Turn the speed control to “0” (off position)
Wait until the blades stop moving.
Remove the lid.
Add the ingredients.
Replace the lid.
Start the motor.
You may add liquid ingredients (such as oil, cream, water, etc.) to the food when blending.
To do so, use the small hole located on the top of the blender jug lid, by the filler cap.
Ensure to replace the filler cap after adding additional ingredients.
Caution: Check that the added ingredients do not push the volume over the MAX
mark.
HOT LIQUIDS
▲Caution: Pouring hot liquids into a cold blender jug could cause the jug to break.
Before pouring into the jug, let the liquid cool down to a temperature you can comfortably
handle – i.e. keep the liquid temperature below 40°C.
To Next Page
Loading...
