26
Maintenance & Cleaning
Step 1 Turn the filter in anti-clockwise
direction, then lift it up.
Step 2 Lift the main filter up
Step 3： lift the Fine filter up
- Inspect the filters for blocking after every time the dishwasher has been used.
- By unscrewing the coarse filter, you can remove the filter system. Remove any food remnants
and clean the filters under running water.
When following this proced ure from step1 to step 3, the filter system will be removed;
when foll owing it from Step 3 to Step 1, the f ilter system will be installed.
The entire filter assembly should be cleaned once a week.
When cleaning the filters, don't knock on them. Otherwise, the filters could be
contorted and theperformance ofthe dishwasher couldbe decreased.
To Next Page
Loading...
Need help?
General
