36
Technical specification
Plug
If your appliance is supplied with a non-rewireable plug fitted to the mains lead you will find that
it incorporates a fuse, the value of which is indicated either on the base of the plug or on the
fuse carrier.
Should the fuse need replacing, you must use an ASTA approved fuse (conforming to BS1362) of
the same rating.
If the fuse cover is lost the plug must not be used until a replacement is obtained from an
electrical supplier.
If you need to remove the plug, cut it from the mains lead and dispose of it. Never attempt to re-
use this plug or insert it into a socket outlet, as there is a very great risk of an electric shock.
Dimensions
Height : 850mm
Width : 450mm
De pth : 58 0mm
Water pressure: 0.04-1.0MPa
Power supply: see rating label
Capacity: 9place s ettings
To Next Page
Loading...
Need help?
General
