Use the dishwasher only for its intended function. During
installation, the power supply cable must not be
excessively or dangerously bent or flattened. Do not
tamper with the controls.
The appliance is to be connected to the water mains using
new hose sets and old hose-sets should not be reused.
The maximum number of place settings to be washed is 9.
The maximum permissible inlet water pressure is 1Mpa.
The minimum permissible inlet water pressure is 0.04Mpa.
Ensure you do not use any corrosive chemicals or
vapours in the appliance. It is not designed for industrial
or laboratory use.
Never put any objects into the openings on the outer
case.
Do not abuse, sit on, or stand on the door or dish rack of
the dishwasher.
Do not obstruct any ventilation openings.
Do not operate your dishwasher unless all enclosure panels
are properly in place. Open the door very carefully if the
dishwasher is operating, there is a risk of water squirting
out.
Safety instructions
5
To Next Page
Loading...
Need help?
General
