12
Door Reversal
6. Position the door in the correct position at the top and put the pin of the
upper hinge in to the top of door and then install the top hinge on the left
hand side and fix it in place with 3 screws. Put the hinge cover on the upper
hinge. Ensure the door is aligned horizontally and vertically so that the seals
are closed on all sides before finally tightening the top hinge. Check that the
door opens and shuts correctly after you have completed the door reversal
process.
Note:
• The appliance must now be upright for a minimum of 3 hours before turning
it on.
To Next Page
Loading...
Need help?
General
