11
Door Reversal
2. Remove the three plastic inserts on the opposite side of the fridge and door.
Now fix the top door bracket to this side using the screws that was previously
removed. Replace the plastic hinge cover.
3. Remove the adjustable foot at the bottom of the fridge and set aside.
4. Unscrew the two screws holding the bottom door hinge and carefully moving it
across to the opposite side and fix into position. Care must be taken as the door
will be loose. Once this has been completed screw in the adjustable foot to the
opposite side of the fridge. Check that the door opens and shuts correctly
after you have completed the door reversal process.
Note:
• The appliance must now be upright for a minimum of 3 hours before turning
it on.
To Next Page
Loading...
